FRYER 23L 6KW

The 6.0kW heater is controlled by a potentiometer located on the control panel. It is possible to set the operating temperature in the range of 60~200°C. The installed splash-proof switch allows you to turn off the device without having to disconnect the power cable from the mains. The removable heater can be hung on a special holder in the position where the dripping oil goes back into the tank. The fryer has an additional safety feature that automatically turns off the heater when it is pulled out of the tank. An additional protection protects it from overheating at temperatures above 260°C.

A particularly useful feature of the YATO fryer is the use of the so-called "cold zone", i.e. the gap between the heater and the bottom of the tank. This function uses the phenomenon that the heat generated by the heater rises to the top, heating the oil. On the other hand, under the heater, the oil temperature is lower. As a result, crumbs and food residues falling to the bottom of the tank are stored in oil at a lower temperature and do not burn.

In addition, the YATO fryer has a drain tap that allows you to drain the oil from the tank. This is a particularly useful feature that allows the oil to be changed very quickly. In addition, it allows you to pour your old oil directly into the canister, thus minimizing the risk of spilling it.

Both the housing and the lid of the fryer are made of high-quality stainless steel. This makes the fryer quick to clean and keep clean.

The YATO fryer has a very durable basket with dimensions of 490x280x100mm with side handles. On the other hand, special hooks allow the basket to be hung directly above the tank, minimizing the risk of oil splashing on the worktop. This significantly increases the cleanliness of the workstation and minimizes the time needed for cleaning. In addition, the fryer has a side drainer on which you can leave the fried products to cool and drip.

The fryer, powered by 380~400V, has dimensions of 570x580x340mm and weighs 14.0kg.